TRENDnet TL2-G244 - Port Manager; Port Basic Settings; Port Monitoring

24-Port Gigabit Layer 2 Switch w/ 4 Shared Mini-GBIC Slots
6-2
Port Manager
Port Basic Settings
This page is to configure basic settings of switch ports.
Figure 29 – Layer2 Management > Port Manager > Basic Settings
Parameter
Description
Port
Specify the switch port to be configured.
Link State
Display the physical connection states of the port.
Admin State
Specify the administrative status of the port. Default is enabled.
MTU (90-1522) bytes
To setup the Maximum Transmission Unit (MTU) frame size of the interface,
and the range is from 90 to 1522 bytes. Default is 1500.
Link Up/Down Trap
To enable/disable the link up/down trap information delivery. Default is
enabled.
Click Apply to submit the changes.
Port Monitoring
This page is to configure the port monitoring function on the device.