2: Getting Started
Turning off
LED Indicator
There is a three-color LED indicator on the Edge, located to the right of the TSI logo.
Table 2-1 explains when and why the LED indicator color will appear.
NOTE: The LED indicator can be disabled via DMS (see “Chapter 3, "Setting up the Edge via
DMS".)
A flashing red LED indicates the dosimeter 1 dose has exceeded the alarm level.
A flashing amber LED indicates the dosimeter is stopped and has not exceeded the
dosimeter 1 dose alarm level.
A flashing green LED indicates the dosimeter is running and has not exceeded the
dosimeter 1 dose alarm level.
Table 2-1: LED indicators explained
Navigating
Once the dosimeter is “Powered-On,” press the up/down ▲/▼ arrows to navigate through the
measurement values and battery run time.
Turning off
1. Press and hold the on/off and enter button.
A “3, 2, and 1” countdown will appear as the dosimeter is powered off.
NOTE: To halt the power off mode, simply release the on/off enter button.
To Next Page
Loading...
Need help?
General
