5: Viewing your Studies in DMS
Downloading Data
5: Viewing your Studies in DMS
The focus of this chapter is to discuss how to view your studies via Detection Management Software.
The first section explains how to retrieve your studies from the dosimeter, and the subsequent
sections will then walk you through viewing, organizing, and customizing your studies.
NOTE: You have the option of 15 different languages in DMS including: English, Spanish,
Chinese (Simplified), Korean, Portuguese, German, French, Italian, Russian, Japanese,
Turkish, Czech, Polish, Swedish, and Norwegian.
Downloading Data
Loading your studies entails communicating, downloading the sessions/studies (files), and viewing
the files in the data finder page, charts and tables, or report views.
Downloading
1. Ensure DMS is installed.
Install the software from the USB flash drive or visit our website at www.tsi.com.
2. Dock the dosimeter and connect it to your PC using the USB cable (see, “Communicating and
downloading data”).
Figure 5-1: Communicating between your PC and the Edge
3. Power on the Edge by pressing the button.
4. In DMS’ start screen, choose .
Figure 5-2: DMS start screen
To Next Page
Loading...
Need help?
General
