TSI Quest EG5 User Manual

Appendix A
Types
58
Measurements
Types
Displayed Data and
status indicators
SPL, Average value (Lavg or Leq), Maximum value (Lmx), Minimum
value (Lmn), Peak Value (Lcpk), Exposure, Run Time, TWA, UL Time,
Lc-a
Measurement Parameters
Dosimeters
Up to three dosimeters at once (eg5), each with its own assignable
profile (via DMS only).
RMS Range
70 to 140 dB
RMS Weighting
A or C weighting
RMS Time Response
Fast or Slow
Exchange Rate (ER)
3 dB, 4 dB, or 5 dB
Peak Range
110 dB to 143 dB
Peak Weighting
A, C or Z weighting
Criterion Levels
70 to 90 dB in 1 dB increments
Threshold
70 to 90 db in 1 dB increments
Upper Limit (UL)
70 to 140 dB in 1 dB increments
Calibration
Pre-calibration
When performed, valid prior to the start of the study.
Post-calibration
When performed, valid for the previous study.
Storage
Calibrations for a study are stored in the related study file.
Calibrator
requirement
Calibrations should be performed at 114 dB at 1 kHz.
Communications
The Edge communicates via the EdgeDock1 and/or the EdgeDock5. Communications is
supported via USB cable from the docking station to the PC.
Special Functions
Security
Key sequence protection through the keypad when running.
Auto-Run
May be programmed via DMS.
Logging
Data logging which includes Lavg/Leq, Lmx
,
Lcpk

TSI Quest EG5 Specifications

General

Brand	TSI Quest
Model	EG5
Category	Measuring Instruments
Language	English