TSI Quest EG5 - Locking and Unlocking the Dosimeter; Contact and Service Information

4: Running and Operating
Locking or Securing
43
Locking or Securing
 How to lock or secure
1. Turn the dosimeter on and press the button to begin logging your study.
2. To enable the lock, press button three consecutive times within one second intervals.
 The Lock screen will appear.
Figure 4-9: Locking/Securing run
NOTE: If lock/secure run does not activate, please check that locking is set up on your
dosimeter.
Unlocking
 How to unlock
1. To unlock, press button three consecutive times, within one second intervals, and then
press the button.
a. If the padlock icon and the key indicator were on the screen, these will vanish and the
measurement view will appear along with the run indicator.
b. If you enabled the lock feature (with the key indicator showing and the measurement view
showing), then the key indicator will disappear.
2. To stop your study, press the button and the 3, 2, 1 will display as it ends the study.
3. To download and view your results in DMS, please see Chapter 5.)
Padlock icon
Secure all
Key indicator
Indicates dosimeter is locked
while running.