Product Description
Properties and Features
12
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
4.1.2 Display Elements
The device has the following LED indicators:
n Power supply
n Group and bus errors
n Status
n Diagnostics
4.2 Properties and Features
n Integrated Cloud functionality (≥ V1.4.6.0): Transfer of CODESYS variables into the Cloud
n PROFINET IO and EtherNet/IP™ Device, Modbus TCP, Modbus RTU and CANopen slave
n Master functionalities:
– Modbus TCP /Modbus RTU master
– PROFINET Controller
– EtherNet/IP™ Scanner
– CANopen Manager
– SAE J1939 Manager
n Ethernet and USB programming interface
n Programmable according to IEC 61131-3 with CODESYS V3 in:
– IL = Instruction List
– LD = Ladder Logic
– FBD = Function Block Diagram
– SFC = Sequential Function Chart
– ST = Structured Text
n Integrated Gold CAP buffered Real Time Clock (RTC)
n USB Device port as programming and service interface
n USB Host port for connecting USB memory sticks for firmware-update, program backup, pro-
gram restore, data synchronization
n Protocol converter - for example from Ethernet to serial communication
n 7/8"-connector for power supply
– TBEN-L4-PLC-…: 4-pole
– TBEN-L5-PLC-…: 5-pole
n Two 4-pole M12-connectors for Ethernet
n 8 digital channels configurable as PNP inputs and/or outputs (2 A)
n Several LEDs for status indication
n Switch Mode (< V1.4.6.0): Integrated Ethernet switch, allows line topology
n Dual MAC Mode (≥ V1.4.6.0): 2 separate Ethernet ports for connecting different Ethernet net-
works
n Integrated Webserver
n Transmission rate 10 Mbps and 100 Mbps
n Fibre-glass reinforced housing
n Shock and vibration tested
n Fully potted module electronics
n Degree of protection IP65/IP67/IP69K
To Next Page
Loading...
