turck TBEN-L Series Instructions For Use

Configuring and Parameterizing
Parameters
94
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Parameter name Value Description
Swap A/B line
No
yes The polarity of the A and B lines of the serial in-
terface is reversed (only applies to the RS485
operating mode).
Operation mode
RS232
The interface is operated as RS232 interface.
RS485 The interface is operated as RS485 interface.
Parity none No parity
odd Odd parity (1 bit error detection)
even Even (1 bit error detection)
8.1.5 Interface parameters – CAN
The parameter can only be set in CODESYS.
Parameter name Value Description
Baudrate (kBit/s) 10
20
50
100
125
500
800
1000
Defines the baudrate for the connected CAN
network.

turck TBEN-L Series Specifications

General

Brand	turck
Model	TBEN-L Series
Category	I/O Systems
Language	English