Commissioning
Commissioning TBEN-L…PLC-… as Cloud gateway
86
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Restart the device.
a The cloud connection status (Status) shows that the TBEN-L...-PLC-... is connected to the
cloud.
Fig.90: Webserver – TBEN-L…-PLC-… – Cloud connection established (Status)
7.4.5 Transfer process data from CODESYS to the cloud
The transfer of the process data of the TBEN-L...-PLC-... from a CODESYS project into the Turck
Cloud takes place via a symbol configuration in the CODESYS project.
Add a symbol configuration to the project CODESYS project via Application Ò Add Ob-
ject Ò Symbol Configuration. The symbol configuration contains all variables used in
the project.
Mark variables to be displayed in the web server and in the cloud and in the Access
Rights column define whether the variables should only be read, written or read and writ-
ten in the cloud. The web server only allows read access under CLOUD Ò Portal Ò
Nodes see ”Clean Data Nodes (Nodes)” [}114].