V02.00 | 2019/11
121
11.1.3 Executing the firmware update via the web server
Open the web server and log in.
Under MAIN Ò Firmware click the SELECT FIRMWARE FILE button.
Select the storage location of the file and select file.
Start the firmware update via the UPDATE FIRMWARE button.
Restart the device after the firmware update has been completed.
Fig.112: Web server – executing the firmware update
12 Repair
The device must not be repaired by the user. The device must be decommissioned if it is faulty.
Observe our return acceptance conditions when returning the device to Turck.
12.1 Returning devices
Returns to Turck can only be accepted if the device has been equipped with a Decontamination
declaration enclosed. The decontamination declaration can be downloaded from
https://www.turck.de/en/retoure-service-6079.php
and must be completely filled in, and affixed securely and weather-proof to the outside of the
packaging.
To Next Page
Loading...
Need help?
General
