Commissioning
Put master/slave functions into operation in CODESYS
38
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Activate the function „auto-reconnect“ at the Master
to assure that CODESYS automatically confirms communication errors and tries to con-
tinue with executing Modbus commands instead of interrupting the Modbus communic-
ation. Otherwise the error has to be reset using a slave function block.
Fig.42: Configuring the Modbus TCP Master
To Next Page
Loading...
