turck TBEN-L Series - Page 62

Commissioning
Put master/slave functions into operation in CODESYS
62
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Configuring the in- and output data
The device is automatically configured with a data width of 256 byte in- and 256 byte output
data.
Fig.66: EtherNet/IP™ Connection CDS3 Ethernet/IP Slave
NOTE
The EDS file limits the maximum number of in- and output data for the device to 256
Byte each. If the device is configured as generic device, than up to 496 Byte input
data and 492 Byte output data are possible.