Commissioning
Put master/slave functions into operation in CODESYS
70
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
7.3.17 Commissioning TBEN-L...-PLC-... as SAE J1939 Manager
Properties
Max. number of devices 254
Input data max. 8 KB
Output data max. 8 KB
Configuring the SAE J1939 Manager
The J1939 Manager from 3S - Smart Software Solutions GmbH is used.
Add the SAE J1939 Manager to the CANbus using the Add Device function and configure
it.
Fig.74: Adding the SAE J1939 Manager
To Next Page
Loading...
