138
Fuel Recommendation
• Use only BSVI ES Gasoline.
- BS VI petrol containing upto 20% of ethanol
by volume can be used.
• Higher ethanol content in petrol can lead to
- degrade plastic and rubber components of
fuel system and vehicle parts.
- cause corrosion damage to metal parts like
fuel tank, etc.
- result in startability & drivability issues.
- decrease fuel economy.
Ethanol absorbs water very easily, resulting fuel
separation. Extra care shall be taken to prevent
moisture entry into fuel tank while filling ethanol
blended petrol and water washing of vehicle.
The engine and the exhaust system might be very hot
even after switching OFF the engine. Care should be
taken not to touch the exhaust system with any part of
your body.
Park the vehicle in a place where the pedestrians or
children are not likely to touch the hot surface.
Do not park the vehicle near dry grass or any other
flammable resources which might catch fire.
Using padlocks or other locks like brake disc locks,
rear sprocket locks etc. to prevent the movement of
the motorcycle is very dangerous and may affect the
motorcycle operation and safety of the users.
Never mix oil in the petrol. Always fill fuel from reputed
and reliable fuel stations.
Use fuel additives in petrol (as recommended by additive
manufacturer) for low carbon deposition.
To Next Page
Loading...
Need help?
General
