160
Safety Precautions
Before you are starting any maintenance repairs,
• Make sure that engine is in ‘OFF’ condition. This
will help in eliminating several potential hazards
like:
- Poisoning from engine exhaust Carbon
Monoxide (be sure there is proper ventilation
whenever engine is operated in indoor).
- Let the engine and exhaust to cool before
working on the motorcycle to avoid burns
from hot parts.
- Do not run the engine without instruction for
doing the same to avoid injury from moving
parts.
• Carefully read the instruction before starting, and
ensure that you have tools and skill required for
doing the maintenance service.
• Park the vehicle on a flat firm surface with the
side stand, center stand (if available) or the
auxiliary stand (paddock stand refer page 192)
to prevent the motorcycle from falling while
doing the maintenance service.
• While working on batteries or fuel related items
care must be taken to avoid fire or explosion. Use
non-flammable solvent only. Keep away the fire
(like cigarettes, sparks and flames etc.) from the
battery and fuel related items.
• Ensure to remove the headlamp fuse, to avoid
battery discharge during working.
We recommend that the maintenance jobs as per the
planned maintenance schedule be performed by your
TVS Motor Company Authorised Main Dealer. Trained
service personals of the Dealer can provide quality,
reliable and economical service to your vehicle.
Use only TVS Motor Company Limited Genuine parts for
long and reliable life of your motorcycle.
To Next Page
Loading...
Need help?
General
