71
71
Total three documents only can be stored in the TFT
Instrument cluster.
Document transfer will work only when VIN number in
the TVS Connect App matches vehicle’s VIN number.
Document transfer cannot be initiated once app. is
connected for ride.
Ride can be connected when image transfer is in
progress but ‘Start Tour’ functionality will not work when
document transfer is in progress.
Rate of document transfer may vary, based on type of
mobile and software version.
When ride is connected and document transfer is also
ongoing, rate of document transfer may be reduced.
In case if document is transferred partially and deleted
from TVS Connect App, please ensure that document
is also deleted from cluster before syncing the new
document in the same slot in cluster.
In case of ignition ‘ON / OFF’ off during document
transfer, document transfer will not resume until user
clicks on resume button in TVS Connect App.
Note
d) Preferences
Under the ‘Preferences’ menu there are nine options
available for you to select.
• To set the ‘Preferences’ menu:
- Keep the vehicle stationary and switch ‘ON’
the ignition. After the self-check of instrument
cluster, press the ‘ENT’ (D1) button to enter
menu function (ref. Fig. 24).
- Navigate using ‘Up’ (D2) and ‘Down’ (D3)
arrow.
- Press the ‘ENT’ button after selecting the
‘Preferences’ menu.
Set
km/h
60
oc
30Coolant Temp
km
Range 30
rpm
6700
5
km/h
URBAN
05:30
PM
Menu
Trip details
My vehicle
Preference
Ride mode
999
MENU
d
To Next Page
Loading...
