35
35
Quick shifter
Quick shifter sensor (QSS) senses the gear shifting
force applied on the gear shift pedal by the rider
and signals the Engine Control Unit (ECU). The ECU
automatically increases / decreases the torque of
engine for a pre-set time period to enable the shift
gear without applying the clutch.
In ‘Urban’ mode
Upshifting condition:-
• While riding the vehicle at slow speed (crawling)
without applying the throttle, while the engine
rpm is greater than 2700 rpm and when the
engine temperature is 50 degree and above
upshifting is possible.
• Gear upshift works only with open throttle. While
shifting do not close or blip throttle.
• There will not be any delay between gear to gear
change during upshifts with wide open throttle.
• During cruise control, upshifts can be done
throughout the cruise speed.
• In manual traction control (MTC) intervention,
upshift is possible at any friction surface (low to
high) only with open throttle.
Downshifting condition:-
• Downshifting is possible with and without throttle
opening at any engine rpm.
• During cruise control downshift can be done
throughout the cruise speed.
• In manual traction control (MTC) intervention
downshift is possible at any friction surface.
In ‘Sport’ mode
Upshifting condition:-
• Upshifting of gear is possible only in throttle
opening condition and engine rpm is above 3000
rpm from cold engine temperature. Do not close
or blip throttle during gear shifting.
• There will not be any delay in power feel between
gear to gear change during upshifts with wide
open throttle.
• During cruise control, upshifts can be done
throughout the cruise speed.
The QSS is very sensitive to improve your joy of ride.
Avoid keeping foot on the gear lever while riding.
Any input from the gear lever will result in upshift or
downshift of gear.
To Next Page
Loading...
Need help?
General
