73
73
d1. Dynamic headlamp
The dynamic headlamp option allows you to adjust
the intensity of your vehicle’s headlamp through
connected instrument TFT cluster.
- After entering the ‘Preferences’ menu, select
the ‘Dynamic headlamp’ option using ‘Up’
(D2) or ‘Down’ (D3) arrow (ref. Fig. 24).
- Once the ‘Dynamic headlamp’ option is
selected, press the ‘ENT’ (D1) button.
• By setting in automatic, the headlamp intensity
adjusts automatically based on the speed of the
vehicle.
• When manual is selected, the headlamp goes to
default mode.
Set
km/h
60
oc
Coolant Temp 30
km
Range 30
rpm
6700
5
km/h
URBAN
05:30
PM
Dynamic headlamp
Manual
Automatic
SET
999
MENU
d2. Day Running Lamps (DRL)
DRL of the vehicle can be controlled with connected
instrument TFT cluster.
- After entering the ‘Preferences’ menu, select
the ‘DRL’ option using ‘Up’ (D2) or ‘Down’
(D3) arrow (ref. Fig. 24).
- Once the ‘DRL’ option is selected, press the
‘ENT’ (D1) button.
• ‘DRL’ has two states ‘Automatic’, and ‘Off’.
Set
km/h
60
oc
Coolant Temp
30
km
Range
30
rpm
6700
5
km/h
URBAN
05:30
PM
DRL
999
Off
SET
Automatic
MENU
• When headlamp switch is in ‘Low beam’ position
the headlamp glows as DRL. But if the ‘DRL’ is
turned ‘OFF’, the headlamp glows as ‘Low beam’.