TYM T723 - Main Clutch

11-2
Part names and
inspection items
Nominal
dimensions
Standard value
for reassembly
Usable limits Service instructions
and remarks
CLUTCH DISC
ASSEMBLY
(Dry single plate)
Facing wear
8.6±0.3㎜
(0.339 in)
At 650 kgf
5.8 ㎜
(0.228 in)
Rivet head depression
should maintained at
more than 0.2 ㎜
Play between hub
spline and input
gear in rotational
direction
0.3 ㎜
(0.012 in)
Should be measured
on the hub.
Clutch cover
(Dual type)
Pressure plate
flatness
0.05 ㎜ or less 0.5mm
(0.020)
Spline
hub
No.of
teeth
19
Outer
diameter
Ø35.0 ㎜
(1.378 in)
Inner
diameter
Ø31.7 ㎜
(1.248 in)
Distance from
release lever
1.0 ㎜
(0.039 in)
Free play of
CLUTCH
PEDAL
20 ∼ 30 ㎜
(0.79-1.18 in)
Adjust with the clutch
rod
(turn buckle)
Total stroke 97 ㎜
Clearance
between safety
switch and push
arm
12 ±1 ㎜
(0.47 ±0.04 in)
2. MAIN CLUTCH (CHAPTER 4)