u-blox ANTARIS 4 User Manual


your position is our focus

Figure 117: Content of a Configuration File
When clicking the “Edit” button in the GPS Configuration dialog, the Notepad editor opens (standard
Windowssoftware).Configurationsarestoredthefollowingway:
IS
®
basedGPSreceiverwheretheconfigurationisfrom.Never
change this line!
hlinecontainsthesame:<classID>-<messageID>-<hexadecimalbyte
themessage>.Thebyte cl d bytes),payloadlength(2bytes),
adlengthbytes).Th ters the enotincluded.Theywillbe


Pleaseref RIS
®
4 Protocol ford taile
• 1
st
line:itcontainstheversionoftheANTAR
• Forthe2
nd
lineandfollowingeac
codeof codeconsistsof
esynccharac
assan
and
messageIDs(2
checksumarpayload(paylo
calculated
automatically.
ertoANTA
Specifications [9] e dinformation.
GPSModules-SystemIntegrationManual(SIM)(incl.ReferenceDesign) PCSupportTools
GPS.G4-MS4-05007-A1
  Page 143

u-blox ANTARIS 4 Specifications

General

Brand	u-blox
Model	ANTARIS 4
Category	GPS
Language	English