105
direction detected by the IMU exceeds 10°, the software will pop-up
prompts.
【Floor (0 °, 0 °)】
● The default method is horizontal installation, and the horizontally
mounted robotic arm does not need a tilt angle and a rotation angle.
【Ceiling (180 °, 0 °)】
● For ceiling-mount, users simply need to set the mounting method as
ceiling, and it is not necessary to set the angle of rotation.
【WallUp (90 °, 180 °)】
● Indicates that the robotic arm is wall-mounted and the end of the
robotic arm is facing up.
【WallDown (90 °, 0 °)】
● Indicates that the robotic arm is wall-mounted and the end of the
robotic arm is facing down.
【Customized】
● Mount at other angles. For mounting at a certain angle. It is necessary
to set the tilt angle and the rotation angle according to the actual
situation.
How to determine the tilt angle and rotation angle?
To Next Page
Loading...
