EasyManuals Logo

UFactory xArm User Manual

UFactory xArm
249 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
139
The “Real Robot” indicates that the robotic arm is connected. It is
currently a real robotic arm, and all control functions on the live control
panel are available.
1.5.2 Emergency Stop
Click on the emergency stop button to immediately stop the current
motion and clear all cached commands.
Note:
The “STOP” button in xArm Studio is different from the one on the
control box.
1. The “STOP” button in xArm Studio allows the robotic arm to
stop the current motion and clear all cache commands
immediately. It is a software stop, and the power is still on.
2. The Emergency STOP button on the control box: Send out a stop
command to cut off the power supply of the robotic arm, and thence
the posture of the robotic arm will slightly brake and fall.

Table of Contents

Other manuals for UFactory xArm

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the UFactory xArm and is the answer not in the manual?

UFactory xArm Specifications

General IconGeneral
Payload5 kg
Repeatability±0.1 mm
Programming LanguagePython, C++, ROS
Communication InterfaceEthernet
Operating Temperature0°C to 45°C

Related product manuals