UFactory xArm User Manual

158
End-Effector: Contains common commands to control the end-effector,
such as gripper, vacuum gripper.
Logic: Contains commonly used logic commands.
Loop: Contains common loop commands such as multiple loops, infinite
loops, and breaking loops.
Math: Contains commands for mathematical operations.
Advanced: Includes location notes and message reminders.
1.6.4 Setting
【Set TCP speed（）mm/s】
● Set the speed of the linear motion in mm/s.

UFactory xArm Specifications

General

Payload	5 kg
Repeatability	±0.1 mm
Programming Language	Python, C++, ROS
Communication Interface	Ethernet
Operating Temperature	0°C to 45°C