Making calls in the team/executive/secretary configuration 101
Deactivating call forwarding
@ Open the Program/Service menu page 26.
Select and confirm the option shown.
¤ Press the required trunk key.
or
j Enter the required trunk number.
or
¤ If available, press the "CFW MULAP" key.
Understanding LED messages of the "CFW MULAP" key
_ The LED on the "CFW MULAP" key is off - call forwarding is not active for this
trunk.
or
¤ The LED on the "CFW MULAP" key lights up - call forwarding is active for this
trunk.
or
£ The LED on the "CFW MULAP" key flashes slowly - the trunk is the destination
of call forwarding.
Forward Line: Off
If you have activated call forwarding for a trunk, a special dial tone sounds
when the line is seized.
To Next Page
Loading...
