Using team functions 103
Using team functions
If configured (consult your service personnel), your telephone is part of a team.
The team consists of internal phones that are able to use certain functions.
Activating/deactivating a group call
If configured (consult your service personnel), you belong to one or more groups
of stations, which can be reached via hunt group or group call station numbers.
Incoming calls are signaled one after the other (= hunt group) or simultaneously
(= group call) on all phones in the group, until a group member answers the call.
You can also belong to a team (including executive/secretary configurations) in
which station numbers are programmed on trunk keys page 96.
Each station in the group can still be reached via their personal station number.
You can activate and deactivate the audible signal for a hunt group, group call
or individual trunks in a group (including executive/secretary).
If the LED on a programmed "Hunt group" key is illuminated page 70, this
means that the audible tone was activated for at least one group.
At the idle menu page 24.
Select using the Softkey and confirm the option shown
1
,
or
Select using the Softkey and confirm the option shown.
_or ¤ Press the "Hunt group".
Special features must be taken into consideration if your telephone oper-
ates with OpenScape Business network environment page 108!
This function is not available for the executive phone in team/executive/
secretary configurations.
Leave group
1.
Join group
To Next Page
Loading...
Need help?
General