66 Enhanced phone functions
Leaving a Conference
Select using the Softkey.
Select using the Softkey and confirm the option shown.
or
\ Replace the handset, if this feature is configured (contact your service person-
nel).
Ending a Conference
Select using the Softkey.
Select using the Softkey and confirm the option shown.
or
\ Replace the handset, if this feature is configured (contact your service person-
nel).
Removing the central office party from the Conference
Select using the Softkey.
Select using the Softkey and confirm the option shown.
Activating tone dialing/DTMF suffix-dialing
You can transmit dual-tone multifrequency (DTMF) signals to control devices
such as an answering machine or automatic information system.
@ Press the menu key page 25.
Select using the Softkey.
Select using the Softkey.
µ€ Navigate to DTMF dialing.
Select using the Softkey and confirm the option shown
1
.
j You can use the keys 0 through 9, *and
#
to transmit DTMF sig-
nals.
Conference g
Leave conference
Conference g
End conference
Conference g
Drop last conf. party
Program/Service g
Calls g
DTMF dialing
1.
Ending the call also deactivates DTMF suffix dialing.
Your system may be configured so that you can start DTMF suffix-dialing
immediately after setting up a connection.
To Next Page
Loading...
