Unify OpenScape Desk Phone CP400T User Manual

Enhanced phone functions 73
Programming a procedure key
Numbers and functions which require further input, i.e. which contain several op-
erating steps, can be saved on a key on your telephone.The relevant service
personnel must grant appropriate authorization.
For example the function "Associated dial"  page 60 together with the required
input (number of the phone to for which the call should be made and the number
to be dialed) can be saved on a key.
Numbers which require further input can also be saved.
_ Hold down the key shown.
or
@ Press the menu key page 25.
Select using the Softkey.
µ€ Navigate to Prog. feature key.
Select using the Softkey.
_ Press the key shown.
Select using the Softkey.
Select using the Softkey.
Select using the Softkey and confirm the option shown.
j Enter procedure. Example: *67 231 123456
*67 Code for associated dial
231 Number of the phone to for which the call should be made
12345 the number to be called.
if nec. _ Press "Pause" to enter pauses (a "P" appears on the display).
Select using the Softkey.
or If you make a mistake:
Select using the Softkey. This deletes all entered digits.
Select using the Softkey.
or
Select and confirm the option shown.
Program/Service g
Prog. feature key
Change key
More features g
Procedure key
Save
Previous
Exit
Another key
Select the saved procedure by pressing the key.
Procedures with activatable/deactivatable functions are activated with one
press of the button and deactivated with the next.
You can press the procedure key during a call to automatically send the
saved digits as DTMF signals  page 66. For display messages when
saving procedures, see  page 118.

Unify OpenScape Desk Phone CP400T Specifications

General

Brand	Unify
Model	OpenScape Desk Phone CP400T
Category	Telephone
Language	English