Unify OpenScape Desk Phone CP400T - Accepting a Call from an Answering Machine

Enhanced phone functions 51
Activating the door opener
@ Press Main Menu key.
Open the Program/Service menu  page 25.
Select and confirm the option shown.
Select and confirm the option shown.
j Dial the entrance telephone number.
j Enter the five-digit code. Default code = "00000".
or
Select the displayed function and press the "OK" dialog key to change the code.
Select and confirm the option shown.
or
You can also open the door without a doorbell ring.
Deactivating the door opener
@ Open the Program/Service menu  page 26.
Select and confirm the option shown.
Select and confirm the option shown.
Accepting a call from an answering machine
If an answering machine is connected to your system (ask the responsible tech-
nician) and you have programmed the answering machine’s internal number on
a key  page 70, you can accept the call from the answering machine.
_ The LED lights up. Press the key shown.
Program/Service
Feature Settings g
Door opener on
3=change password
1=enable with ring
2=enable w/o ring
Feature Settings g
Door opener off