Unify OpenScape Desk Phone CP400T - Repdial Key Configuration; Configuring Repdial Keys

74 Enhanced phone functions
Configuring repdial keys
You can also program internal and external station numbers on the second level.
The LED function is not available for internal station numbers on the second lev-
el. To program the second level, you must program a "Shift" key  page 70.
See also  page 21.
_ Hold down the key shown.
or
@ Press the menu key page 25.
Select using the Softkey.
µ€ Navigate to Prog. feature key.
Select using the Softkey.
_ Press the key you want to configure.
Select using the Softkey.
if nec.
Select using the Softkey.
Select using the Softkey.
Select using the Softkey.
j Enter the station number.
If you make a mistake:
^ Press. This deletes all entered digits.
Select using the Softkey.
or
Select and confirm the option shown.
Program/Service g
Prog. feature key
Change key
Next layer
Destinations g
Repdial key
Exit
Another key
You dial the saved number by pressing the key  page 41.
You can also save a number during a call.