Unify OpenScape Desk Phone CP400T - Dialing with Call Charge Assignment; Assigning Calls to Projects with Account Codes

78 Displaying and assigning call charges
Dialing with call charge assignment
You can assign external calls to certain projects.
Prerequisite: Your service personnel have defined account codes for you.
@ Press the menu key page 25.
Select using the Softkey.
µ€ Navigate to Calls.
Select using the Softkey.
Select using the Softkey and confirm the option shown
1
.
j Enter the account code.
if nec. # Press this key.
or
Select using the Softkey.
May be necessary, depending on configuration; contact your service personnel.
j Enter the external phone number.
Program/Service g
Calls g
Account code
1.
#=Save
You can also enter the account code during a call.