Unify OpenScape Desk Phone CP400T User Manual

Basic functions 37
Basic functions
Answering a call
Your OpenScape Desk Phone CP400T phone rings with the tone signal set
when an incoming call is received. The call is also visually signaled on the call
display.
• When you receive an internal call, your telephone rings once every four sec-
onds (single-tone sequence).
• When you receive an external call, your telephone rings twice in rapid succes-
sion every four seconds (dual-tone sequence).
• When you receive a call from the entrance telephone, your telephone rings
three times in rapid succession every four seconds (triple-tone sequence).
• If a call is waiting, you hear a short tone (beep) every six seconds.
If transmitted, calling party information (name, phone number) appears on the
graphic display.
Answering a call via the handset
The phone is ringing. The caller appears on the screen.
^ Lift the handset.
if nec. " Set volume louder or quieter. Press the buttons until you reach the desired vo-
lume.
Please read the introductory chapter "Getting to know your OpenScape
Desk Phone CP400T"  page 15 carefully before performing any of the
steps described here on your phone.
Your service personnel can adjust the ring cadence for external and inter-
nal calls for you. In other words, different ring cadences can be set for dif-
ferent internal callers.
An incoming call will interrupt any ongoing telephone setting operations.

Unify OpenScape Desk Phone CP400T Specifications

General

Brand	Unify
Model	OpenScape Desk Phone CP400T
Category	Telephone
Language	English