Unify OpenScape Desk Phone CP400T User Manual

64 Enhanced phone functions
Holding external calls
If you have programmed a hold key on your phone  page 70, you can put ex-
ternal calls on hold.
Then all other stations can accept the call on the assigned trunk.
_ Press the "Hold" key.
The message of the relevant trunk appears (e.g. 801) and note the trunk num-
ber.
If available, the LED of the assigned trunk key flashes slowly.
if nec.
\ Replace the handset or press the key shown.
Depending on the configuration, this may be necessary so other members can
also pick up the call on hold.
Accepting call on hold
Prerequisite: One or more calls are on hold. The phone is idle.
@ Press the menu key page 25.
Select using the Softkey.
Select using the Softkey.
µ€ Navigate to Retrieve line
Select using the Softkey.
or
_ If the "Retrieve"  page 70 key is available, press it.
j Enter the noted trunk number.
or
£ If there is a "Line:" key available for the relevant trunk, this flashes slowly. Press
the key shown.
Held on line: 801
Program/Service g
Calls g
Retrieve line

Unify OpenScape Desk Phone CP400T Specifications

General

Brand	Unify
Model	OpenScape Desk Phone CP400T
Category	Telephone
Language	English