Unify OpenScape Desk Phone CP400T - Direct Call Transfer to Executive Phone; Transferring Calls Directly to Executive Phone

102 Making calls in the team/executive/secretary configuration
Transferring calls directly to the executive
phone
Normally, all calls for the executive are audibly signaled only by the secretary
phone.
You can set audible signaling so calls are signaled only by the executive phone
or by a second phone assigned to it.
Prerequisite: On your phone there is a key programmed with the function "Ring
Transfer". The default label is "Ring xfer".
Activating
_ Press the "Ring xfer" key. The LED lights up.
or
@ Open the Program/Service menu  page 26.
Select using the Softkey.
_ Press the required trunk key.
or
j Enter the required trunk number.
Deactivating
¤ Press the "Ring xfer" key. The LED goes out.
or
@ Open the Program/Service menu  page 26.
Select using the Softkey.
_ Press the required trunk key.
or
j Enter the required trunk number.
Ring Transfer: On
Ring Transfer: Off