Getting to know your OpenStage phone 15
Programmable function keys
Your OpenStage 30 T has eight illuminated keys to which you can assign functions or numbers.
Depending on how they are programmed, you can use the keys as:
• Function keys Page 55
• Repdial/Direct station selection key
Page 56
Each key can be programmed with one function.
Press the key briefly to activate the programmed function or dial the stored number.
Your OpenStage is delivered with label strips. Write functions or names in the white fields on the
label strips.
The status of a function is shown by the LED on the corresponding function key.
Meaning of LED displays on function keys
Keypad
In cases where text input is possible, you can use the keypad to input text, punctuation and special
characters in addition to the digits 0 to 9 and the hash and asterisk symbols. To do this, press the
numerical keys repeatedly.
Example: To enter the letter "h", press the number 4 key on the keypad twice.
Alphabetic labeling of dial keys is also useful when entering vanity numbers (letters associated
with the phone number’s digits as indicated on the telephone spell a name, e.g.
0700 - PATTERN
= 0700 - 7288376).
Increase the number of programmable function keys by connecting a key module
Page 13.
The configuration of direct station selection keys must be activated by your administrator.
Direct station selection keys can be assigned an internal number from the HiPath 4000 net-
work.
A typical application of direct station selection keys is the executive-secretary configuration
Page 80
LED Meaning of function key
S Off The function is deactivated.
T Flashing
1
1 In this manual, flashing sensor keys are identified by this icon, regardless of the flashing interval. The flashing interval
represents different statuses, which are described in detail in the corresponding sections of the manual.
Indicates the function status.
R On The function is activated.
To enter a digit in an alphanumerical input field, hold down the relevant key.
To Next Page
Loading...
