78 Making calls via multiple lines
Holding and re-accepting a call on a trunk
key
Prerequisite: You have accepted a call on a line key ( Page 71) or you are
conducting a consultation call.
S Briefly press the line key you are currently using,
or
Select and confirm the option shown.
The line key where the call is on hold flashes slowly. The call can be continued
on any phone in the team where the LED for this line key is flashing.
Retrieving the call
T Press the flashing line key. Proceed with your call.
Exclusively holding and re-accepting a call
on a trunk key
Prerequisite: You have accepted a call on a line key or you are conducting a
consultation call that only you can or wish to continue.
S Press the "Excl. Hold" programmed function key.
or
Select and confirm the option shown.
The line key where the call is parked, flashes slowly. The call can be continued
on your phone only and is not signaled on any other phone.
Retrieving the call
T Press the flashing line key. Proceed with your call.
Only the "witness" may end silent monitoring, by hanging up or pressing
the line key.
To Next Page
Loading...
