Making calls via multiple lines 77
Blocking other parties from joining a call
If your phone is not already set to block other parties from joining, you can make
this setting manually. This block applies to the current or the next call.
[ You are already conducting a call on one line.
or
^ Lift the handset.
With a programmed function key
R Press the "Privacy" programmed function key.
Via the menu
N Open the Program/Service menu Page 18.
Select and confirm the option shown.
Select and confirm the option shown.
Other parties are now blocked from joining the call.
Ending the connection on a line key
n Press the key shown. The LED goes out.
or
\ Replace the handset.
Third-party monitoring
During a call, a predefined party can be prompted to join the call as a "witness"
using the "Slnt Mon Req" programmed function key. Your call partner is not in
-
formed that a "witness" is joining the call. The "witness" cannot participate in the
call; they can only hear what is being said.
Prerequisite: Third-party monitoring is configured on your system and the "Slnt
Mon Req" programmed function key is configured on your phone. You are con
-
ducting a call. "Privacy" must be deactivated.
S Briefly press the "Slnt Mon Req" programmed function key twice. The "witness"
hears a special tone on their phone and the message "Connect witness or tape"
appears on their display.
^ The "witness" lifts the handset.
or
T The "witness" presses the line key for the line on which the call is being conduct-
ed.
The "witness" can now listen to the call without being noticed.
When configuring and using third-party monitoring, please note the appli-
cable data protection regulations.
To Next Page
Loading...
