Unify OpenScape HiPath 4000 - Using Speed Dialing; Talking to Your Colleague with a Speaker Call

34 Enhanced phone functions
Ending retrieval
Select and confirm the option shown.
or
N Press the key shown.
Using speed dialing
Speed dial numbers may contain command or access code sequences and may
be linked to other speed dial numbers
 Page 59.
Making calls using central speed dial numbers
Prerequisite: You know the central speed dial numbers  Page 59.
N Open the Program/Service menu  Page 18.
Select and confirm the option shown.
j Enter the speed dial number.
The connection is immediately established.
Dialing using individual speed dial numbers
Prerequisite: You have configured individual speed dial numbers  Page 60.
N Open the Program/Service menu  Page 18.
Select and confirm the option shown.
0 ... 9 Press the configured speed dial key.
The connection is immediately established.
Talking to your colleague with a speaker call
You can place a speaker call to an internal party using the loudspeaker on their
telephone. You can also use the functions under "HiPath
4000 as a entrance
telephone system"
 Page 45.
Prerequisite: A "COM Spk 2way" programmed function key is configured on
your phone.
S Press the "COM Spk 2way" programmed function key.
j Enter the station number.
Z Wait for the tone.
^ Lift the handset and speak to the party who answers.
or
n Press the key and enter speakerphone mode.
Return?
This function must be configured by your administrator.
Use speed dialing?
Use speed dialing?