Unify OpenScape HiPath 4000 - Disconnecting Conference Participants; Putting the Conference on Hold

Enhanced phone functions 41
Disconnecting conference participants
You are connected to a conference and wish to disconnect one of the partici-
pants.
Select and confirm the option shown.
The phone number and, if necessary, the name of the conference participant
with the first status number, is displayed in the first display line.
Confirm to show the next participant.
or
Select and confirm to exit the display.
or
Select and confirm to disconnect the current participant from the conference. If
the conference only included three parties, it is now closed.
Disconnecting the last participant
You would like to disconnect the last participant who joined the conference.
Select and confirm the option shown. The last participant who joined the confer-
ence is disconnected. If the conference only included three parties, it is now
closed.
Putting the conference on hold
On multi-line telephones, you can place the conference on hold and conduct an-
other call on a different line, for example.
R Press the hold key.
or
Select and confirm the option shown.
The conference is placed on hold.
R Press the line key for the conference that is on hold – you are then reconnected
to the conference.
View members?
220870 Coco 1
Next conference party?
Stop viewing?
Release party?
Remove last party?
Hold?
Conference
On hold