Making calls via multiple lines 79
Accepting a specific held line
A colleague in an open-plan office has parked a call on a line key and requests
that you accept the call. You do not have access to this line.
^ Lift the handset.
Select and confirm the option shown.
j Enter the phone number of the phone where the call is parked. In this way you
can accept the call.
Forwarding calls on lines
When you activate call forwarding for a shared line ( Page 70), the line is gen-
erally also forwarded to other phones.
The process for configuring call forwarding for a specific line is identical to the
call forwarding process already described. You must simply ensure that the re
-
quired line is already seized.
S Press the line key for the required line. The LED lights up.
Please read the additional notes on Page 24.
Ring transfer
If you temporarily leave your workstation or do not wish to be disturbed, you can
transfer incoming calls to your line to another destination. A "RTRLN" function
key (ring transfer/line) can be programmed for each line.
Activating
S Press the "RTRLN" programmed function key. The LEDs on your phone and on
the destination phone light up. When you receive a call, the line key flashes but
the phone does not ring. The call is signaled on all other team phones.
Deactivating
R Press the "RTRLN" programmed function key. The LED goes out. Calls are sig-
naled on the phone once more.
To Next Page
Loading...
