Unify OpenScape HiPath 4000 - Individual Phone Configuration; Setting Contrast; Adjusting Audio Settings; Adjusting the Ring Volume

Individual phone configuration 85
Individual phone configuration
Setting contrast
+ or - Press one of the keys shown in idle mode  Page 16.
Select and confirm the option shown.
+ or - Modify the setting. Keep pressing the key until the desired contrast is set.
= Save.
Adjusting audio settings
Optimize the audio settings on your OpenStage for your environment and ac-
cording to your personal requirements.
Adjusting the ring volume
+ or - Press one of the keys in idle mode  Page 16 or while a call is in progress.
Confirm the option shown.
+ or - Raise or lower the volume. Keep pressing the key until the desired volume is set.
= Save.
Adjusting the ring tone
+ or - Press one of the keys shown in idle mode  Page 16.
Select and confirm the option shown.
+ or - To adjust the ring tone: Keep pressing the keys until the desired tone is set.
= Save.
Display contrast?
Ringer volume?
Ringer pitch?