Unify OpenScape HiPath 4000 - Moving with the Phone; Logging the Phone off from the Current Port; Log the Phone on at the New Location

68 Moving with the Phone
Moving with the Phone
Check with your administrator whether this is possible in your system!
After talking to your administrator, you can log your telephone off from the cur-
rent port and log on again at the new port. Phone settings are then unchanged.
Logging the phone off from the current port
j Enter the logoff code. If necessary ask your administrator for this code.
j Enter the PIN.
Unplug the phone plug from the port socket.
Log the phone on at the new location
Put the phone plus in the port socket.
j Enter the logon code. If necessary ask your administrator for this code.
j Enter the PIN.
If you move with a first and second phone, e.g. in an executive-secretary
configuration), the second phone must be logged off first and then the first
phone. At the new port the first phone must be logged on first and then the
second phone.