42 Enhanced phone functions
Entering commands using tone dialing
(DTMF suffix dialing)
After dialing a phone number you can set tone dialing. This allows you to use
command entries to control dual-tone multifrequency (DTMF) devices, such as
answering machines or attendant systems.
N Open the Program/Service menu Page 18.
Select and confirm the option shown.
Select and confirm the option shown.
You can now enter commands using the keys 0 - 9, the asterisk key, and the
pound key.
System-wide parking
On HiPath 4000 systems, you can park up to ten internal and/or external calls
and retrieve them on another phone.
There are two options for parking a call:
• Automatic park
• Manual park
You cannot park calls if:
• All park positions are busy
• The park position you wish to use is busy
• The station is an attendant console
• The call is a consultation call
• The call is in a conference
Ending the call also deactivates DTMF suffix dialing.
Depending on your system configuration, "DTMF suffix dialing?" may ap-
pear in the display once you have finished entering the number. You can
then enter commands immediately after dialing the phone number.
To Next Page
Loading...
