74 Making calls via multiple lines
Saving phone numbers for "Redial on a line"
Prerequisite: "Saved number redial for a specific line" is configured and not
"Saved number redial (last number dialed)".
Saving the dialed phone number or a caller’s phone number
You have called a party on a particular line and this call is still in progress. Or,
you were called by another party whose phone number is displayed, and this call
is still in progress.
, Press the key shown. The phone number is saved for the current line.
n Press the key shown. The LED goes out.
or
\ Replace the handset.
Line mailbox
Callers who wish to reach you when you are absent can leave a message on the
mailbox for the relevant line.
Both voice and fax messages can be stored in the mailbox (if so configured).
Prerequisite: A mailbox is configured for one or more lines.
Please note that only one user can edit one mailbox at any time.
Retrieving messages
If new messages that have not yet been retrieved are in the mailbox and a pro-
grammable function key has been assigned the "Mailbox" function, the LED of
this key illuminates.
Please refer to the information on Page 17.
R Press the "MBLN" function key.
Information regarding the caller is displayed Page 17.
Responding to a callback request
A callback request is displayed.
Select and confirm the option shown. The party is called on the relevant line.
Next entry
More than one entry is available.
Select and confirm the option shown. The next entry is displayed.
If your phone belongs to an ONS group (parallel call Page 88), please
note the following:
Signaling is available for the mailbox (MWI) on all phones in an ONS
group.
To Next Page
Loading...
