Unify OpenScape HiPath 4000 - Answering Calls with the Line Keys; Answering Calls in the Sequence in Which They Are Offered; Answering Calls Preferentially; Deactivating;Activating Ringing (Call)

Making calls via multiple lines 71
Answering calls with the line keys
If several calls arrive at the same time, you can answer calls as normal in the
sequence in which they are offered. However, you can also answer calls prefer
-
entially.
Prerequisite: The administrator have defined the sequence in which incoming
calls should be routed to line keys.
Answering calls in the sequence in which they are
offered
Your telephone rings (call). The caller ID is displayed. The LED of the line key
offered flashes quickly.
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
Answering calls preferentially
Your telephone rings (call). The caller ID is displayed. The LED of the line key
offered flashes quickly. The LEDs of the other line keys also flash quickly.
T Press the preferred line key. The caller ID is briefly displayed.
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
Deactivating/activating ringing (call)
If you are making a call on one line, ringing for other incoming calls can disturb
your current call. If the "Ringer cutoff" function is activated, your telephone no
longer rings. Incoming calls are then only signaled when the corresponding line
key flashes.
With the "Ringer Off" programmed function key
S To deactivate ringing:
Press the "Ringer Off" function key. The LED lights up. 
The phone does not ring for incoming calls.
R To activate ringing:
Press the "Ringer Off" function key. The LED goes out. 
The phone rings for incoming calls.