Unify OpenScape HiPath 4000 - Activating;Deactivating Do Not Disturb; Activating;Deactivating Speaker Call Protect

64 Privacy/security
Activating/deactivating "Do not disturb"
If you do not wish to take calls, you can activate do not disturb. Internal callers
hear the ring tone and the message "Do not disturb". External callers are redi
-
rected to the attendant console. The administrator can set forwarding destina-
tions for do not disturb so that internal and external calls can be forwarded.
Prerequisite: The administrator has activated do not disturb for all HiPath 4000
stations in your system.
N Open the Program/Service menu  Page 18.
Select and confirm the option shown.
Select and confirm the option shown. The display shows whether do not disturb
is activated or deactivated.
Confirm the option shown.
or
confirm the option shown.
Activating/deactivating "Speaker call
protect"
You can block speaker calls to your phone. If a caller attempts to contact you via
a speaker call, the connection is established as a normal call.
N Open the Program/Service menu  Page 18.
Select and confirm the option shown.
Select and confirm the option shown. The display shows whether "Speaker call
protect" is activated or deactivated.
Confirm the option shown.
or
confirm the option shown.
If your phone belongs to an ONS group (parallel call  Page 88), please
note the following: 
Do not disturb can be activated/deactivated on any phone in the ONS
group - it then applies to all phones in that group.
Feature settings?
Do not disturb?
Activate?
Deactivate?
When you lift the handset, you will hear a tone reminding you that "Do not
disturb" is activated.
The attendant can bypass "Do not disturb" and reach you.
If the administrator has blocked "Do not disturb" generally for HiPath 4000,
the menu option "Do not disturb?" does not appear in the Program/Service
menu.
Feature settings?
Speaker call protect?
Activate?
Deactivate?