Unify OpenScape HiPath 4000 - Fixed Call Forwarding (All Calls)

Basic functions 25
Fixed call forwarding (all calls)
If you have programmed a destination for fixed call forwarding, you can activate
and deactivate this using the "Call forwarding" key (if configured). The pro
-
grammed forwarding destination remains unchanged until you reprogram or de-
lete it.
Configuring/modifying a fixed forwarding destination
N Open the Program/Service menu  Page 18.
Confirm the option shown.
Confirm the option shown. "Variable call forw." is displayed.
Confirm the option shown. "Fixed call forw." is displayed.
If you have already programmed call forwarding, the call forwarding destination
is displayed.
Select and confirm the option shown.
j Enter the phone number of the call forwarding destination. If you have already
saved a destination, it is deleted.
Confirm, when the phone number is complete.
Fixed call forwarding is saved and activated.
Activating fixed call forwarding
Prerequisite: A fixed call forwarding destination is saved  Page 25.
r Press the key shown. The LED lights up.
or
: Open the idle menu  Page 16.
Select and confirm the option shown.
Deactivating fixed call forwarding
R If configured: Press the illuminated "Call forwarding" key.
or
: Open the idle menu  Page 16.
Select and confirm the option shown.
Fixed call forwarding is deactivated. The destination number is retained.
Destinations?
Call forwarding?
Next forwarding type?
Enter destination:
Save?
Act. FWD-FIXED?
Deact call forwarding?