Unify OpenScape HiPath 4000 - Enhanced Phone Functions; Answering Calls; Accepting Calls Via the Headset; Answering a Call Via a DSS Key

Enhanced phone functions 31
Enhanced phone functions
Answering calls
Accepting calls via the headset
Prerequisite: The headset is connected.
o The LED flashes when a call is received. 
Press the key shown. Conduct call.
Ending the call:
o Press the key shown. The LED goes out.
Answering a call via a DSS key
Prerequisite: You have configured direct station selection keys on your tele-
phone  Page 15 and  Page 56.
T Press the DSS key.
n The LED key lights up. You can use speakerphone mode.
or
^ Lift the handset.
Accepting a call for another member of your team
If a team member does not answer a call within 15 seconds (system-depen-
dant), the remaining team members hear an alert tone.
In idle mode
The phone rings. "Call for" is displayed on the phone.
^ T Lift the handset and press the flashing "Pickup" key. You have now picked up the
call.
or T Press the flashing "Pickup" key.
Speakerphone mode.
During calls
T Press the flashing "Pickup" key.
The first party is placed on hold while you are connected to the second party.
For information on the meanings of the LED displays of the DSS keys, see
 Page 15.