Unify OpenScape HiPath 4000 - Automatically Parking a Call; Manually Parking a Call

Enhanced phone functions 43
Automatically parking a call
You can automatically park a call in a free park position from your phone, and
retrieve it on your phone or another phone.
Call park
S Press the "System Park" programmed sensor key. The first free park slot is used
and indicated on the display. The call is now parked.
\ Replace the handset.
Retrieving a parked call
S Press the "System Park" programmed sensor key.
0 ... 9 Enter the park slot number of the parked call and proceed with the call.
Manually parking a call
You can manually park a call in a free park position from your phone, and retrieve
it on your phone or another phone. You can also perform this function on non-
display phones.
Call park
Select and confirm the option shown.
j Enter the destination number.
The call is now parked.
\ Replace the handset.
If "Park" is not available, you will receive acoustic and also visual notification.
Confirm and continue the call.
or
\ Replace the handset. You will receive a recall for the call on hold.
Retrieving a parked call
^ Lift the handset
or
n Press the key and enter speakerphone mode.
You can also put the call on hold first by confirming "Consultation?" and
then parking the call.
Park to station?
Return to held call?