24 Basic functions
Transferring without announcement
Select and confirm the option shown.
j Enter and confirm the required party’s phone number.
\ Replace the handset.
Call forwarding
Overview of forwarding types
You can configure different call forwarding settings for your station.
Apart from "Forwarding for intnl" and "Forwarding for extnl", the forwarding types
are mutually exclusive. You can set and activate one forwarding destination for
each of the two exceptions.
If no call is set up between the other two parties within 40 seconds, you
are called again. You are reconnected with the first party.
If your phone belongs to an ONS group (parallel call Page 88), please
note the following:
Call forwarding can be configured on any phone in the ONS group and will
then apply to all phones in that ONS group.
Call forwarding between two phones in an ONS group is not possible.
FWD-VAR-ALL-BOTH on All calls are forwarded to the saved phone
number, the phone number is deleted after
deactivation.
FWD-FIXED on All calls are forwarded, the saved phone
number is not deleted after deactivation.
FWD-VAR-ALL-INT on Only internal calls are forwarded.
FWD-VAR-ALL-EXT on Only external calls are forwarded.
FWD-VAR-BUSY-BOTH on If your station is busy, all calls are forward-
ed.
FWD-VAR-RNA-BOTH on If you do not answer a call, all calls are for-
warded after a certain length of time.
FWD-VAR-BZ/NA-BTH on If your station is busy or you do not answer
a call, all calls are forwarded after a certain
length of time.
To Next Page
Loading...
