APX 525/625 Generator Revision C Pre-Installation
©
2005 Del Medical Imaging Corporation
7/5/2005 Page 94
33. Connect ground wire from power cable to as shown below.
Figure 18. Power Cable Ground
34. Connect red, white and black wires (1,2 & 3 in Fig. 19) from power cable to
Tap wire #3 on all three coils of transformer with Burndy connectors as shown
below. It does not matter which color wire goes in which position. Securely
wrap each Burndy connector with electrical tape.
Figure 19. Power Cable Connections
1
3
2
To Next Page
Loading...