Default Setting (System Menu)
8-17
8
Original Image
Set the default original document type. The available default settings are shown below.
Use the procedure below to select the default quality setting for originals.
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Original Image.
3 Select the default original image.
4 Press [OK].
Scan Resolution
Select the default scanning resolution. The options are 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi,
200x400dpi Super Fine, 200x200dpi Fine, 200x100dpi Normal.
Use the procedure below to select the default resolution setting.
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Scan Resolution.
3 Select the default resolution.
4 Press [OK].
Color Selection (Copy)
Select the default copying color mode setting. The available default settings are shown below.
Item Description
Text+Photo Text and photos together.
Photo For photos taken with a camera.
Printed Photo For photos printed in magazines, etc.
Text Only text, no photos.
Map For maps, etc.
for OCR Image quality suitable for OCR software.*
* This function is only available for black and white mode.
Printed Document For documents printed from this machine.
Color mode Description
Auto Color Automatically recognize whether documents are color or black
and white.
Full Color Scan document in full color.
Black & White Scan document in black and white.
To Next Page
Loading...
Need help?
General
